MOB AQC

Project Description

MOB AQC

HIGH PRECISION VISUAL SYSTEM FOR AUTOMATIC QUALITY CONTROL

Fast, automatic and high precision: dimensional control of cut parts, control of the perforation, counting of cut parts, re-loading of the wrong, cut parts into the cutting job, high resolution leather, thickness measurement.

Automatic quality control thanks to the powerful visual system with 3 high definition camera

Immediate compliance report

DIMENSIONAL CONTROL

The dimensions are detected with a precision of 0.15 mm and the compliance with the set values is reported.

* OUT OF TOLERANCE

PERFORATION CONTROL

The system detects imperfect or missing holes and their possible wrong position.

* IDENTIFICATION OF MISSING HOLES

MATERIAL FLAWS CONTROL

The system recognizes defects or residual marks on the surface that are present in areas of the pattern were they are not allowed.

INTERACTIVE CONTROL

Designed to achieve greater accuracy and for irregular shapes, the dimensional interactive control allows to place manually the part on the exact pattern which show pre-defined inside and outside allowance.

Also during the interactive control it is possible to detect imperfection on holes and any defects on the surface of the material.

Immediate compliance report

INTERACTIVE RE-LOADING

ASSISTED BY A VISUAL SYSTEM

The parts, which are non-compliant after the traditional manual quality control, can be easily re-loaded in the cutting job on the MOB AQC. The non-compliant part is placed on the monitor.

The system automatically recognizes the right pattern (name, order and material) and re-loads it into the cutting job.

The operator can manually enter the number of pieces to re-cut. Alternatively an automatic recognition piece by piece can be carried out.

QUANTITY TO RE-CUT

HIGH RESOLUTION
LEATHER THICKNESS
MEASUREMENT

Thanks to an accurate laser sensor, it is possible to measure the thickness of the skin with a precision of 0.01 mm and with a repeatability smaller than 0.15 mm.

AUTOMATIC
COUNTING OF CUT
PARTS QUANTITY

The laser sensor allows the system to automatically count the cut parts, simply placing them under the laser beam.